| |
| |
| Review and Prospects for Current Studies on Very High Cycle Fatigue of Metallic Materials for Machine Structural Use | |
| |
| |
| |
| PSB Threshold and Fatigue Limit of Polycrystalline Copper in the VHCF-Regime | |
| |
| |
| |
| The Effect of a Cluster of Similarly Oriented Grains (a Supergrain) on Fatigue Crack Initiation Characteristics of Clean Materials | |
| |
| |
| |
| Role of Pre-Strain Effects on the Fatigue Behaviour of Nickel-Base Alloys in the VHCF Range | |
| |
| |
| |
| The Role of Microstructure on Fatigue Lifetime Variability in an a+[beta] Titanium Alloy, Ti-6Al-2Sn-4Zr-6Mo | |
| |
| |
| |
| Relating Gigacycle Fatigue to Other Methods in Evaluating the Inclusion Distribution of a H13 Tool Steel | |
| |
| |
| |
| A Study on Ultra-Long Life Fatigue Characteristics of Maraging Steels with/without Aging Treatment in Rotating Bending | |
| |
| |
| |
| Surface Roughening and Fatigue Behaviour of Pure Aluminum with Various Grain Size in the VHCF Regime | |
| |
| |
| |
| Observation of Inclusions and Defects in Steels by Micro Computed-Tomography Using Ultrabright Synchrotron Radiation | |
| |
| |
| |
| Fatigue Damage Evolution in Ductile Single-Phase Face-Centred Cubic Metals in the UHCF-Regime | |
| |
| |
| |
| Initiation in the Gigacycle Fatigue Regime | |
| |
| |
| |
| Competing Failure Modes in Fatigue and the Consequent S-N Curve Shapes | |
| |
| |
| |
| Study of Fatigue Crack Growth in Gigacycle Fatigue Domain by Thermal Analysis during the Tests | |
| |
| |
| |
| Very High Cycle Fatigue Behavior of the Steel with Carbide-Free Bainite/Martensite Complex Microstructure | |
| |
| |
| |
| Gigacycle Fatigue of Precipitation Hardening Aluminum Alloys | |
| |
| |
| |
| Crack Initiation Mechanisms and Fatigue Lifetime of AISI 420 Steel under Constant and Variable Loading | |
| |
| |
| |
| Strength Level Dependence of Very High Cycle Fatigue Property in Interior Inclusion-Induced Fracture for Bearing Steel in Rotating Bending | |
| |
| |
| |
| Very High Cycle Fatigue of Railway Wheel Steels | |
| |
| |
| |
| Crack Initiation and Propagation in a Stainless Duplex Steel during HCF and VHCF Loading | |
| |
| |
| |
| A New High Speed (150 Hz) Rotating Bending Fatigue Test Machine | |
| |
| |
| |
| In-Service Very-High-Cycle-Fatigue of Titanium Compressor Blades of Aircraft Engines | |
| |
| |
| |
| Microstructure-Sensitive Notch Root Analysis for Ni-Base Superalloys | |
| |
| |
| |
| Effect of Alumite Treatment on Ultra-Long-Life Fatigue Property for Aluminum Alloy in Rotating Bending | |
| |
| |
| |
| Effects of Surface Finishing and Tempering Temperature on Very High Cycle Fatigue Property in High Strength Steels | |
| |
| |
| |
| Effects of Carburizing Temperature on Near-Surface Characteristics that Influence Rolling Contact Fatigue Performance | |
| |
| |
| |
| High Cycle Fatigue Fracture of Cantilevered Specimens with Several Notches | |
| |
| |
| |
| Evaluation of the Giga-Cycle Fatigue Strength, Crack Initiation and Growth in High Strength H13 Tool Steels | |
| |
| |
| |
| Investigation of Microstructural Changes within White Etching Area ("Butterfly") under Rolling Contact Fatigue (RCF) Using TEM and 3D Crack Reconstruction by Focused Ion Beam (FIB) | |
| |
| |
| |
| S-N Curve Characteristic of Bearing Steel under Axial Loading Condition in Very High Cycle Fatigue Regime | |
| |
| |
| |
| A Study of Fatigue Crack Growth 5052 Aluminium-Alloy under Constant-Amplitude Loading | |
| |
| |
| |
| Fatigue Behavior of C38M Steel Up to Very High Cycles | |
| |
| |
| |
| Fatigue Behavior of Ti-6Al-4V Alloy in Very High Cycle Regime | |
| |
| |
| |
| Fatigue Behavior of Ultrafine-Grain Copper in Very High Cycle Fatigue Regime | |
| |
| |
| |
| High-Cycle Fatigue Behavior of Zr-Based Bulk Metallic Glasses | |
| |
| |
| |
| Effects of Shot Peening Treatment on Very High Cycle Fatigue Property in Austempered Ductile Cast Iron | |
| |
| |
| |
| Very High Cycle Fatigue Strength of Bearing Steel with Notch | |
| |
| |
| |
| Influence of Macroscopic and Microscopic Notch Effects on the VHCF Behavior of a Precipitation-Hardened Aluminium Alloy | |
| |
| |
| |
| Surface Effect on the Fatigue Behavior of Mechanical Components in Giga Cycle Regime | |
| |
| |
| |
| Very High Cycle Fatigue Behaviour of Two Different Aluminium Wrought Alloys | |
| |
| |
| |
| Gigacycle Fatigue Behavior of Cold Forging Die Steels | |
| |
| |
| |
| The Nature of Multi-Modal Distribution of Fatigue Durability for Titanium Alloy VT9 | |
| |
| |
| |
| Fatigue Damage of Low Amplitude Cycles under Variable Amplitude Loading Condition | |
| |
| |
| |
| A 20 Kilohertz Optical Strain Gage | |
| |
| |
| |
| New Measuring Methods for the Fatigue Assessment of Metals in the Very High Cycle Regime | |
| |
| |
| |
| Experimental Technique to Study the Tensile Fatigue Behavior of Metallic Foils | |
| |
| |
| |
| Data Fusion and Science Based Modeling: A Technique for Very High Cycle Fatigue Predictions | |
| |
| |
| |
| Statistical Approaches Applied to Very High Cycle Fatigue | |
| |
| |
| |
| A Probablistic Model of Fatigue Strength Controlled by Porosity Population in Cast Aluminum | |
| |
| |
| |
| Random Heterogeneity Scales and Probabilistic Description of the Long-Lifetime Regime of Fatigue | |
| |
| |
| |
| Very High Cycle Fatigue Behavior of a Ti6246 Alloy in Air and in High Vacuum | |
| |
| |
| |
| Environmental Exposure Dependence of Low Growth Rate Fatigue Crack Damage in Al-Cu-Li/Mg | |
| |
| |
| |
| Effect of Frequency and Environment on High Cycle Fatigue of Cast Aluminum Alloys | |
| |
| |
| |
| Effect of Frequency and Environment on Room Temperature Fatigue Performance of E319 Cast Aluminum Alloy | |
| |
| |
| |
| A Review of Failure Mechanisms of Ultra-high Cycle Fatigue in Engineering Materials | |
| |
| |
| |
| Very High Cycle Fatigue Behavior of Nickel-Base Superalloy Rene 88DT at 593[degrees]C | |
| |