Introduction | |
History of Boiler and Pressure Vessel Codes in the the United States | p. 1 |
Scope | |
U-1 Scope | p. 9 |
Application of Section VIII, Division 1 | p. 13 |
U-2 Code User Responsibilities | p. 14 |
U-3 Other Standards | p. 15 |
Design Considerations | |
Materials | p. 17 |
UG-10 Material Identified with or Produced to a Specification Not Permitted or a Material Not Fully Identified | p. 20 |
UG-11 Prefabricated or Preformed Pressure Parts | p. 20 |
UG-12 and UG-13 Fasteners | p. 21 |
UG-16 General | p. 22 |
UG-19 Special Construction | p. 23 |
UG-20 Design Temperature | p. 24 |
Design Pressure | p. 26 |
Other Loadings | p. 28 |
UG-23 Maximum Allowable Stress Values | p. 29 |
Allowable Longitudinal Compressive Stress | p. 31 |
UG-24 Castings | p. 33 |
UG-25 Corrosion | p. 34 |
Fabrication | |
Fabrication by Welding | p. 35 |
U-3 Weld Joint Classification System | p. 37 |
Weld Joint Designs | p. 38 |
U-12 Weld Joint Efficiency | p. 40 |
P-Numbers | p. 44 |
Weld Procedure and Welder Qualifications | p. 45 |
Weld Fabrication Quality Requirements | p. 46 |
Special Requirements for Welded Fabrications | p. 52 |
Fabrication by Forging | p. 56 |
Fabrication by Brazing | p. 57 |
Special Fabrication Techniques | |
Plate Heat Exchangers | p. 61 |
Integrally Forged Vessels | p. 63 |
Enamel Lined Vessels | p. 63 |
Heat Exchanger Box Headers | p. 64 |
Interlocking Layered Vessels | p. 64 |
Materials | |
Carbon and Low Alloy Steels | p. 67 |
Welding Carbon and Low Alloy Steels | p. 70 |
UCS-56, Heat Treatment of Carbon and Low Alloy Steels | p. 72 |
Toughness Requirements for Carbon and Low Alloy Steels | p. 74 |
Nonferrous Materials | p. 82 |
High Alloy Steels | p. 84 |
Cast Irons | p. 88 |
Quenched and Tempered Steels | p. 90 |
Construction Techniques Requiring Special Material Considerations | p. 95 |
Material Selection | p. 98 |
Cylindrical and Spherical Parts Subjected to Internal and External Pressure | |
Theory | p. 101 |
Thickness of Shells Under Internal Pressure | p. 103 |
UG-28 Thickness of Shells and Tubes Under External Pressure | p. 111 |
UG-29 Stiffening Rings for Cylindrical Shells under External Pressure | p. 122 |
UG-30 Attachment of Stiffening Rings | p. 126 |
UG-31 Tubes and Pipe When Used as Tubes or Shells | p. 133 |
Heads and Transition Sections | |
UG-32 Formed Heads and Sections, Pressure on Concave Side | p. 135 |
Ellipsoidal Heads | p. 135 |
Torispherical Heads | p. 136 |
Hemispherical Heads | p. 137 |
Conical Heads and Sections (Without Transition Knuckles) | p. 138 |
Toriconical Heads and Sections | p. 140 |
Additional Requirements for Heads | p. 140 |
UG-33 Formed Heads, Pressure on Convex Side | p. 141 |
Unstayed Flat Heads and Covers | p. 142 |
Opening and Reinforcements | |
UG-36 Openings in Pressure Vessels | p. 153 |
UG-37 Reinforcement Required for Openings in Shells and Formed Heads | p. 155 |
UG-39 Reinforcement Required for Openings in Flat Heads | p. 160 |
UG-41 Strength of Reinforcement | p. 163 |
UG-42 Reinforcement of Multiple Openings | p. 165 |
UG-43 Methods of Attaching Pipe and Nozzle Necks to Vessel Walls | p. 166 |
UG-45 Nozzle Neck Thickness | p. 167 |
UG-53 Ligaments | p. 168 |
Appendix 2--Rules for bolted flange connections with ring type gaskets | |
General | p. 193 |
Design Procedure | p. 194 |
Flange Rigidity | p. 203 |
Influence of Bolt Properties | p. 204 |
Reverse Flanges | p. 208 |
Quality Control | |
Quality Control and Inspection | p. 215 |
Quality Control Programs | p. 215 |
Terms and Abbreviations | p. 221 |
Quality Control Manual | p. 223 |
Design Methods not Given in Division 1 | p. 251 |
Applications of Section VIII, Division 1 to Operating Pressure Vessels | p. 253 |
Engineering Data | p. 257 |
Subject Index | p. 273 |
Code Paragraph Index | p. 283 |
Table of Contents provided by Syndetics. All Rights Reserved. |