Acknowledgments | p. ix |
Introduction | p. xi |
Switching Technology Primer | p. 1 |
Objectives | p. 2 |
Network Devices | p. 2 |
Switching Concepts | p. 10 |
The Briefest of Introductions to ATM | p. 20 |
Summary | p. 33 |
Switched VLANs | p. 35 |
Objectives | p. 36 |
VLAN Environments | p. 36 |
VLAN Trunking | p. 46 |
FDDI VLANs | p. 52 |
Spanning Tree Optimization | p. 57 |
Fast EtherChannel | p. 63 |
Gigabit Ethernet | p. 67 |
CGMP and Multicasts | p. 70 |
Summary | p. 77 |
ATM Operation and WAN Switching | p. 79 |
Objectives | p. 80 |
Introduction to UNI Signaling | p. 80 |
ATM Routing and NNI Signaling | p. 88 |
ATM and IP Integration | p. 103 |
LANE | p. 108 |
MPOA | p. 114 |
A Word on RFC 1483 | p. 116 |
Tag Switching | p. 117 |
Summary | p. 125 |
Configuring Workgroup Switches | p. 127 |
Introduction | p. 128 |
Connecting a 2900XL Series Switch into Your Network | p. 128 |
2916XL Hardware Features | p. 136 |
Upgrading the IOS | p. 137 |
Modifying the Configuration | p. 139 |
VLAN Assignment and Inter VLAN Communication | p. 153 |
Using the SPAN Port for LAN Analysis | p. 161 |
Saving and Retrieving Configurations | p. 162 |
Typical Base Configuration | p. 164 |
Password Recovery | p. 167 |
Workgroup Voice over IP | p. 169 |
Summary | p. 211 |
Implementing Large-Scale Switched LANs | p. 215 |
Introduction | p. 216 |
Catalyst 5000 and 5500 Hardware | p. 216 |
Catalyst 5K Initial Configuration | p. 226 |
Ethernet Module Configuration | p. 245 |
Route Switch Module Support for VLANs | p. 270 |
Catalyst 5K Token Ring Implementation | p. 275 |
Catalyst 5K FDDI | p. 284 |
ATM Operation on Catalyst 5K Switches | p. 288 |
Summary | p. 296 |
Implementing ATM Switching | p. 299 |
Introduction | p. 300 |
Overview of ATM Processors for Cisco Routers | p. 300 |
Basic ATM Processor Configuration | p. 303 |
Configuring Classic IP Over ATM on ATM Router Interfaces (RFC 1577) | p. 310 |
Overview of Configuring PPP Services on ATM Router Interfaces | p. 316 |
Introduction to the LS1010 | p. 318 |
Basic LS1010 Configuration | p. 318 |
IISP and PNNI for the LS1010 | p. 330 |
Configuring LANE on the LS1010 | p. 335 |
Overview of LANE 2.0 and MPOA for the LS1010 | p. 340 |
LS1010 Applications | p. 345 |
Summary | p. 355 |
Implementing Switched Networks | p. 359 |
Introduction | p. 360 |
Network Implementation Goals | p. 361 |
Common Switched Network Design | p. 376 |
Two Alternatives in Putting the Three Layers Together | p. 386 |
Redesigning the Routed to a Switched Network | p. 388 |
Redesigning Acme's Routed Network | p. 390 |
Summary | p. 396 |
Index | p. 399 |
Table of Contents provided by Syndetics. All Rights Reserved. |