| |
| |
| Description | |
| |
| |
| Table of Contents | |
| |
| |
| 29101-09 Welding Safety (2.5 Hours) | |
| |
| |
| Covers safety equipment, protective clothing, and procedures applicable to the cutting and welding of metals | |
| |
| |
| 29102-09 Oxyfuel Cutting (17.5 Hours) | |
| |
| |
| Explains the safety requirements for oxyfuel cutting | |
| |
| |
| Identifies oxyfuel cutting equipment and setup requirements | |
| |
| |
| Explains how to light, adjust, and shut down oxyfuel equipment | |
| |
| |
| Trainees will perform cutting techniques that include straight line, piercing, bevels, washing, and gouging | |
| |
| |
| 29103-09 Plasma Arc Cutting (7.5 Hours) | |
| |
| |
| Explains plasma arc cutting equipment and safe work area preparation | |
| |
| |
| Identifies correct amperage, gas pressures, and flow rates | |
| |
| |
| Covers plasma-arc cutting methods for piercing, slotting, squaring, and beveling metals | |
| |
| |
| Explains how to store equipment and clean the work area | |
| |
| |
| 29104-09 Air Carbon Arc Cutting and Gouging (12.5 Hours) | |
| |
| |
| Describes air carbon arc cutting equipment and processes | |
| |
| |
| Identifies the electrodes and safe operation of the equipment | |
| |
| |
| Provides step-by-step instructions for performing air carbon arc washing and gouging activities | |
| |
| |
| 29105-09 Base Metal Preparation (12.5 Hours) | |
| |
| |
| Describes how to clean and prepare all types of base metals for cutting or welding | |
| |
| |
| Identifies and explains joint design and base metal preparation for all welding tasks | |
| |
| |
| 29106-09 Weld Quality (10 Hours) | |
| |
| |
| Identifies the codes that govern welding, including marine welds | |
| |
| |
| Identifies and explains weld imperfections and causes | |
| |
| |
| Describes non-destructive examination practices, visual inspection criteria, welder qualification tests, and the importance of quality workmanship | |
| |
| |
| 29107-09 SMAW-Equipment and Setup (5 Hours) | |
| |
| |
| Describes SMAW welding and welding safety | |
| |
| |
| Explains how to connect welding current and setup arc welding equipment | |
| |
| |
| Identifies and explains using tools for cleaning welds | |
| |
| |
| 29108-09 Shielded Metal Arc Electrodes (2.5 Hours) | |
| |
| |
| Explains electrode characteristics and different types of filler metals | |
| |
| |
| Describes the role of the American Welding Society (AWS) and the American Society of Mechanical Engineers (ASME) | |
| |
| |
| Explains proper storage and control of filler metals and identifies the use of codes | |
| |
| |
| 29109-09 SMAW-Beads and Fillet Welds (120 Hours) | |
| |
| |
| Describes the preparation and setup of arc welding equipment and the process of striking an arc | |
| |
| |
| Explains how to detect and correct arc blow | |
| |
| |
| Describes how to make stringer, weave, overlapping beads, and fillet welds | |
| |
| |
| 29110-09 Joint Fit-Up and Alignment (5 Hours) | |
| |
| |
| Identifies and explains job code specifications | |
| |
| |
| Describes use of fit-up gauges and measuring devices to check fit-up and alignment and use of plate and pipe fit-up and alignment tools to properly prepare joists | |
| |
| |
| Explains how to check for joint misalignment and poor fit | |
| |
| |
| 29111-09 SMAW-Groove Welds with Backing (30 Hours) | |
| |
| |
| Explains groove welds and how to set up welding equipment for making groove welds | |
| |
| |
| Describes how to make groove welds with backing | |
| |
| |
| Provides procedures for making fl at, horizontal, vertical, and overhead groove welds | |
| |
| |
| 29112-09 SMAW-Open V-Groove Welds (80 Hours) | |
| |
| |
| Explains open v-groove welds and how to set up welding equipment for making open v-groove welds | |
| |
| |
| Provides procedures for making fl at, horizontal, vertical, and overhead open v-groove welds | |