Preface | p. ix |
Planning Kitchens | p. 1 |
Designing for Use | p. 4 |
Eat-In Kitchens | p. 9 |
Safety: A Part of the Design | p. 12 |
Variations on the Themes | p. 14 |
Spacing the Parts | p. 38 |
Scaling Drawings | p. 41 |
Start Drawing | p. 51 |
Designing Cabinets to Suit: Base Cabinets | p. 53 |
Wall Cabinets: Spacing to Match the Base Cabinets | p. 56 |
Story Poles | p. 58 |
Modern Methods | p. 59 |
Woods for Cabinetry | p. 79 |
Domestic Hardwoods | p. 90 |
Exotics | p. 108 |
Engineered Woods: Plywoods and Medium-Density Fiberboard | p. 123 |
Plywood | p. 123 |
Softwood Plywood | p. 124 |
Overlays | p. 127 |
Hardboards | p. 128 |
Hardwood Plywoods | p. 128 |
Hardwood Plywood Cost | p. 129 |
Cutting Veneers | p. 130 |
Veneer Matching | p. 131 |
Edging | p. 133 |
MDF | p. 134 |
Laminates | p. 136 |
Tools for the Real Work | p. 137 |
Buy as Needed | p. 138 |
Table Saws | p. 139 |
Band Saws | p. 152 |
Radial Arm Saws | p. 154 |
Jointers | p. 158 |
Planers | p. 158 |
Shapers | p. 160 |
Panel Saw | p. 168 |
Clamps | p. 177 |
Basic Cabinet Joinery | p. 191 |
Butt Joints | p. 191 |
Miter Joints | p. 192 |
Tongue-and-Groove Joints | p. 194 |
Dovetails | p. 194 |
Finger Joints | p. 196 |
Corner Locking Joints | p. 196 |
Framing Joints | p. 201 |
Other Framing Joints | p. 204 |
Dowel Joinery | p. 206 |
Biscuit (Plate) Joinery | p. 207 |
Fastening Joints | p. 208 |
Making Joints with a Router | p. 209 |
The Keller Jig | p. 209 |
Finger Joints on the Table Saw | p. 211 |
More Table Saw Joinery | p. 213 |
Splinter Protection: For the Work, Not the Worker | p. 218 |
Biscuits in the Shop: Using Plate Joiners | p. 218 |
Center Butt Joints | p. 220 |
Miter Joints and Plates | p. 221 |
Gluing and Clamping | p. 222 |
Wood Selection | p. 222 |
Selecting a Cabinetmaking Glue | p. 224 |
Clamping and Clamping Pressure | p. 234 |
The Basic Box: Cabinet Carcass Construction | p. 237 |
Door Sizes and Hinges | p. 240 |
Layout | p. 242 |
Joints That Hold | p. 254 |
Routed Dadoes and Rabbets | p. 257 |
Router Bits | p. 258 |
Shelving | p. 262 |
Aligning Standards | p. 267 |
Assembling the Carcass | p. 267 |
Get Organized | p. 268 |
Glue-Up | p. 269 |
Keep on Checking the Squareness | p. 273 |
Wall Cabinets | p. 274 |
Face Frame Style and Substance, Plus Doors to Suit | p. 275 |
Designing the Face Frame | p. 279 |
Stile and Rail Widths | p. 282 |
Biscuit Joining Needs | p. 285 |
Pocket Screwed Face Frames | p. 287 |
Size Limits | p. 288 |
Shop-Built Jig for Pocket Holes | p. 289 |
Installing Face Frames on Carcasses | p. 291 |
Doing Doors | p. 293 |
Building and Attaching Drawers | p. 303 |
Sides and Backs | p. 304 |
Drawer Bottoms | p. 304 |
Joints | p. 305 |
Drawer Fronts | p. 306 |
Finishing: Put a Glow on It | p. 311 |
Easy Steps to a Great Finish | p. 311 |
Staining | p. 314 |
Notes on Water-Based Finishes | p. 315 |
Open-Pore Woods | p. 316 |
Lacquer Finishing | p. 317 |
Varnish | p. 319 |
Water-Based Finishes | p. 320 |
Spraying | p. 321 |
Installing Base and Wall Cabinets | p. 327 |
Checking the Area of Installation | p. 328 |
Toeboards (Base Systems) | p. 329 |
Finding Studs | p. 330 |
Positioning Base Cabinets | p. 332 |
Hold Countertop Height | p. 334 |
Upper Cabinet Installation | p. 334 |
Final Steps | p. 336 |
Topping It | p. 337 |
Some General Don'ts for Decorative Laminates | p. 338 |
Building Up a Countertop | p. 339 |
Backsplashes | p. 342 |
Working with Sheet Laminate | p. 343 |
Over the Top | p. 344 |
Other Edging Treatment | p. 345 |
Flexibility | p. 347 |
Using Shelves and Other Specialties to Supplement Income | p. 347 |
Working It Out | p. 350 |
Floor Space | p. 352 |
Storage | p. 356 |
Starting the Small Business | p. 359 |
Zoning and Other Possible Problems | p. 369 |
The Office Computer | p. 379 |
Insurance Protection for the Small Business | p. 385 |
Planning and Financing Your Cabinetmaking Business | p. 391 |
Marketing the Small Business | p. 413 |
Where They Are: Locations of Resources, On- and Off-Line | p. 421 |
Index | p. 431 |
Table of Contents provided by Syndetics. All Rights Reserved. |